Defoaming agent for waste water of pulp-making(MX-903)

Add time:2020-04-26 19:05:19   Hits:
Admina:Mingxiang Chemical Technology Group

service line:400-680-8962 +86-13953623913

Information details

Introduction

MX-903 is a kind of defoaming agent, whose main raw material is polysiloxane,introduced from overseas advanced technology&based on water treatment system.It can eliminate the foams resulted from sludge,water treatment chemicals,bactericide and etc.There will be no secondary pollution by using it.It can be widely used in the water treatment systems of paper-making,textile printing and dyeing,pesticides production,petrochemical operation, circulated coolingwater power plant and etc.

Main Spec

Appearance:milky liquid

PH:6-8

Active content:95%

Ionic type:Nonionic

Viscosity(25ºC):≤500mPa.s

Solubility: better solubility in cold water

Characteristics and Application

It has lasting defoaming effect.It is of less dosage,better diffusive permeability,better chemical stability,stronger oxidation-resistance.It is non-toxic,free from corrosion,without side effects,higher safety,will not influence the foams basic characteristic.The dosage is as per the foams system characteristic and amount.It can be diluted with water of 1 to 5 times or be used directly.

Package,Storage&Shelf life time

The package is 25KG,50KG,200KG plastic or steel drum. It should be stored in cold place with better ventilation.The shelf life time is 6 months.There will be slight layers and thickness after long-term storage.Pls stir them evenly before using.